Pre-tightening torque of valve cover mounting screws 5

Explain the valve knee.

The one I received was not practical, but a model, but this one is really not a model.

First of all, let’s have a look. For example, the mouth here is one, which means two, and this is two. This is one with six, and this is two. This side should be six sevens, and the back side should be eight at the top. This side must follow the drawing, and I don’t remember it clearly. It has to be played against it.

The torque on this side is 10 Nm in all aspects. The warning is 5 Nm first, and the tightening is 10 Nm after warning is 5 Nm. The two screws on this side correspond to the screws on the exhaust socket pipe, and this side should also be 10 and 12. These two should be two when they were wrong just now. The ignition coil is inside, and the cannon plug is inside. The electromagnetic side is brand new.

Isn’t there a bypass room here after loading, so there is a gift here, so you must push it up after loading with this small bag, otherwise it will be pressure-relieved, and it will be exactly the same as whether it is loaded or not, and the waste gas will still be oily here, so this thing should be inserted in time after loading.

Here is the antifreezing valve, and here is the antifreezing valve of the exhaust pipe. It costs 39 yuan to buy the pipe, the oil inlet and the cover separately. This is a complete set.